Dell Studio 1735 - Display Panel and Bezel



10. Slide the battery into the bay until it clicks into place.
Display Bezel

Removing the Display Bezel


1. Follow the instructions in Display Assembly.

2. Using your fingertips, carefully pry up the inside edge of the display bezel.

3. Remove the display bezel.

Replacing the Display Bezel

1. Realign the display bezel over the display panel, and gently snap into place.

2. Follow the instructions in Replacing the Display Assembly.
Removing the Display Panel

Removing the Display Panel

1. Follow the instructions in Display Assembly.

2. Remove the display bezel (see Display Bezel).

3. Remove the six screws securing the display panel.
NOTICE: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
NOTICE: The display bezel is extremely fragile. Be careful when removing it to prevent damaging the bezel.
1
display bezel

