Activity
Report
Specify when you want a fax activity report to be printed.
*On Request
After 40 Faxes
Confirmation Specify how often you want to print a fax confirmation.
*On Error
Off
Print For All
Print
Reports
Specify which report or log you want to print.
Activity Report
Send Log
Receive Log
Settings List
Auto Answer Specify Auto Answer settings.
*On
Scheduled
Off
Ringer
Volume
Specify the volume of the ringer from the built-in speaker on the printer.
Off
*Low
High
Answer Fax
When
Specify how many rings you want to occur before the printer answers the fax if the printer is in Auto
Answer mode.
After 1 Ring
After 2 Rings
*After 3 Rings
After 5 Rings
NOTE: In order to use fax blocking, you must have two or more rings selected.
Ring Pattern Specify a type of ring for which the printer will only answer incoming calls with that ring. The default
setting Any answers all incoming calls.
*Any
Single
Double
Triple
Fax Forward Specify if you want your incoming faxes to be forwarded to another fax number.
*Off
Forward
Print & Forward
Caller ID
Pattern
Specify the Caller ID pattern you want to use.
*Pattern 1
Pattern 2
Pattern n
NOTE: The number of patterns shown is based on the country selection.
Manual
Pickup
Keycode
Manually receive an incoming fax even when Auto Answer is turned off or a distinctive ring pattern is
selected.
NOTE: The default pickup code is 3355#. You can enter up to a maximum of 7 digits on the phone or
printer keypad to change the pickup code.
To Next Page
Loading...
