Dell V505 - Page 65

2. From the operator panel, use the left and right Arrow buttons to scroll to SETUP, and then press the
Select button .
3. Use the left and right Arrow buttons to scroll to Defaults, and then press the Select button .
4. Use the left and right Arrow buttons to scroll to Set Defaults, and then press the Select button .
5. Use the left and right Arrow buttons to scroll to Use Factory, and then press the Select button .
Settings are reset to factory defaults.
Changing the Default Operator Panel Settings
To change the default settings on the operator panel:
1. Turn on the printer.
2. Change the operator panel settings.
3. Use the left and right Arrow buttons
to scroll to SETUP, and then press the Select button .
4. Use the left and right Arrow buttons to scroll to Defaults, and then press the Select button .
5. Use the left and right Arrow buttons to scroll to Set Defaults, and then press the Select button .
6. Use the left and right Arrow buttons to scroll to Use Current, and then press the Select button .
The current settings on the operator panel are saved as the new default settings.