cancel the job, and choose a new
paper size.
Install a black or photo
print cartridge on the left
side.
Install a color print
cartridge on the right side.
Install both cartridges.
An ink cartridge is missing.
A ? symbol is shown for every missing cartridge
with the message appearing below it.
Insert a black or photo cartridge in
the left cartridge carrier and a color
cartridge in the right carrier. For
more information, see
Replacing Ink
Cartridges.
Alignment problem. Remove
tape from cartridges or check
troubleshooting. Press
to
retry.
The tape was not removed from the ink
cartridges before the cartridges were installed.
Remove the tape from the ink
cartridges. For more information,
see
Replacing Ink Cartridges.
Black Ink Low. Order Ink @
WWW.DELL.COM/SUPPLIES.
Press
to continue.
Color Ink Low. Order Ink @
WWW.DELL.COM/SUPPLIES.
Press
to continue.
Photo Ink Low. Order Ink @
WWW.DELL.COM/SUPPLIES.
Press
to continue.
Black and Color Ink Low.
Order Ink @
WWW.DELL.COM/SUPPLIES.
Press
to continue.
Photo and Color Ink Low.
Order Ink @
WWW.DELL.COM/SUPPLIES.
Press
to continue.
The ink cartridge is running low on ink. Replace the ink cartridge. For more
information, see
Replacing Ink
Cartridges.
Left cartridge error. Replace
Cartridge.
Right cartridge error.
Replace Cartridge.
An ink cartridge is invalid.
An X symbol is shown for every invalid cartridge
with the message appearing below it.
Replace the invalid ink cartridge.
For more information, see
Replacing
Ink Cartridges.
Cartridge Error. Consult User’s
Guide.
One or both of the ink cartridges is invalid. Remove both cartridges, then install
one at a time to determine which is
invalid.
Memory card problem. Ensure
that it is not damaged and is
inserted correctly.
A memory card or USB key is not inserted
correctly, is damaged, not functional, or its
format is not supported.
Remove the memory card or the
USB key. Refer to the
documentation that came with your
device for more information.
Invalid Device. The attached
USB device is not supported.
Please disconnect and refer to
user manual.
The attached device is not supported, or the
PictBridge-enabled digital camera is not set to
the correct USB mode.
Disconnect the device, or check the
USB mode setup. Refer to the
documentation that came with your
digital camera for more information.
Only one device or media card
is allowed. Please remove all
but one device or card.
More than one memory card or device is inserted
in the printer.
Remove all memory cards and
devices.
Unplug the camera to use other
printer features.
A non-functioning button is pressed while the
printer is in PictBridge mode.
Remove the PictBridge connection
to be able to use the printer for
other functions.
Load PLAIN 8.5x11” and press
. Or Load PLAIN A4 paper
and press
.
A paper type other than plain paper is loaded into
the paper support when attempting to print an
alignment page, a cleaning page, or a network
setup page.
Load plain paper, and then press
the Select button
.
Invalid Proof Sheet. Please