Dell Vostro 1310 - Display Inverter

Display Inverter

Removing the Display Inverter


1. Follow the instructions in Before Working on Your Computer.

2. Remove the hard drive (see Removing the Hard Drive).

3. Remove the WLAN card (see Removing a WLAN Card).

4. Remove the hinge cover (see Removing the Hinge Cover).

5. Remove the keyboard (see Removing the Keyboard).

6. Remove the display assembly (see Removing the Display Assembly).

7. Remove the display bezel (see Removing the Display Bezel).

8. Remove the M2 x 3-mm screw from the display inverter.

9. Disconnect the two display-inverter connectors.

10. Lift the display inverter out of the top cover.


Replacing the Display Inverter


1. Connect the two display-inverter connectors to the display inverter.

2. Replace the M2 x 3-mm screw that secures the display inverter.

3. Replace the display bezel (seeReplacing the Display Bezel).
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.
1
top cover
2
display inverter connector
3
M2 x 3-mm screw
4
display inverter
5
display inverter connector


NOTICE: Removal of the bezel from the top cover requires extreme care to avoid damage to the bezel.
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.
NOTE: This procedure assumes that you have completed the removal procedure first.