Back to Contents Page
Hard Drive
Service Manual
Removing the Hard Drive
Replacing the Hard Drive
Removing the Hard Drive
1. Follow the procedures in Before Working on Your Computer.
2. Close the display and turn the computer upside down.
3. Remove the M2.5 x 5-mm screw that secures the hard-drive compartment cover.
4. Remove the cover and set it aside.
5. Remove the two screws securing the hard drive to the hard-drive bracket.
6. Slide the hard drive out of the hard-drive bracket.
7. Pull the mylar tab to release the hard drive.
8. Lift the hard drive out of the computer.