Dell Vostro 1310 - DC Power Module

Back to Contents Page
 DC Power Module
Service Manual
Removing the DC Power Module
Replacing the DC Power Module
Removing the DC Power Module


1. Follow the instructions in Before Working on Your Computer.

2. Remove the hard drive (see Removing the Hard Drive).

3. Remove the WLAN card (see Removing a WLAN Card).

4. Remove the fan (see Removing the Fan).

5. Remove the hinge cover (see Removing the Hinge Cover).

6. Remove the keyboard (see Removing the Keyboard).

7. Remove the display assembly (see Removing the Display Assembly).

8. Remove the palm rest (see Removing the Palm Rest).

9. Disconnect the cable that secures the internal card with Bluetooth®wireless technology to the system board (see Removing the Card).

10. Remove the optical drive (see Removing the Optical Drive).

11. Remove the USB daughter card (see Removing the USB Daughter Card).

12. Remove the system board (see Removing the System Board Assembly).

13. Disconnect the DC-power module connector from the system board.

14. Lift the DC power module out of the computer.
Replacing the DC Power Module

CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.
1
DC-power module connector
2
DC power module