Dell Vostro 1310 - Page 47


1. Position the DC power module in the computer and connect the DC- power module connector to the system board.

2. Replace the system board (see Replacing the System Board Assembly).

3. Replace the USB daughter card (see Replacing the USB Daughter Card).

4. Replace the optical drive (see Replacing the Optical Drive).

5. Connect the cable that secures the card with Bluetooth wireless technology to the system board (see Replacing the Card).

6. Replace the palm rest (see Replacing the Palm Rest).

7. Replace the display assembly (see Replacing the Display Assembly).

8. Replace the keyboard (see Replacing the Keyboard).

9. Replace the hinge cover (see Replacing the Hinge Cover).

10. Replace the fan (see Replacing the Fan).

11. Replace the WLAN card (see Replacing a WLAN Card).

12. Replace the hard drive (see Replacing the Hard Drive).
Back to Contents Page

CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.
NOTE: This procedure assumes that you have completed the removal procedure first.