Dell Vostro 1310 - Fan

Back to Contents Page
 Fan
Service Manual
Removing the Fan
Replacing the Fan
Removing the Fan


1. Follow the instructions in Before Working on Your Computer.

2. Remove the M2.5 x 5-mm screw that secures the memory cover.

3. Remove the memory cover.

4. Remove the two M2.5 x 5-mm screws that secure the fan to the base of the computer.

5. Disconnect the fan connector from the system board connector, and remove the fan.
Replacing the Fan


1. Align the screw holes on the fan with the holes on the base of the computer.

2. Replace the two M2.5 x 5-mm screws to secure the fan to the base of the computer.

3. Connect the fan connector to the system board connector.

4. Replace the memory cover.

5. Replace the M2.5 x 5-mm screw that secures the memory cover.
Back to Contents Page
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.
1
M2.5 x 5-mm screws (2)
2
fan
3
fan connector


CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.
NOTE: This procedure assumes that you have completed the removal procedure first.