1. Align the guide holes in the speaker assembly with the guide posts on the base of the computer, then lower the assembly into place.
2. Replace the two M2.5 x 5-mm screws to secure the speaker assembly to the base of the computer.
3. Replace the system board (see Replacing the System Board Assembly).
4. Replace the optical drive (see Replacing the Optical Drive).
5. Connect the cable that secures the internal card with Bluetooth wireless technology cable to the system board (see Replacing the Card).
6. Replace the palm rest (see Replacing the Palm Rest).
7. Replace the display assembly (see Replacing the Display Assembly).
8. Replace the keyboard (see Replacing the Keyboard).
9. Replace the hinge cover (see Replacing the Hinge Cover).
10. Replace the fan (see Replacing the Fan).
11. Replace the WLAN card (see Replacing a WLAN Card).
12. Replace the hard drive (see Replacing the Hard Drive).
Back to Contents Page