Display bezel
Removing the display bezel
CAUTION: The information in this section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
3. Remove the M.2 2230 solid-state drive or the M.2 2280 solid-state drive, whichever applicable.
4. Remove the wireless card.
5. Remove the display assembly.
6. Remove the display hinge caps.
About this task
NOTE: This procedure applies only to computers with a plastic chassis.
The following image indicates the location of the display bezel and provides a visual representation of the removal procedure.
94 Removing and installing Field Replaceable Units (FRUs)
To Next Page
Loading...
