Steps
1. Place the display assembly on a clean and flat surface.
2. Align and place the display bezel on the display assembly.
3. Starting from the top corner, press on the display bezel and work around the entire bezel until it clicks onto the display
assembly.
Next steps
1. Install the display hinge caps.
2. Install the display assembly.
3. Install the wireless card.
4. Install the M.2 2230 solid-state drive or the M.2 2280 solid-state drive, whichever applicable.
5. Install the base cover.
6. Follow the procedure in After working inside your computer.
98
Removing and installing Field Replaceable Units (FRUs)
To Next Page
Loading...
