Dell Vostro 1510 - Replacing the Processor Thermal-Cooling Assembly

44 Processor Thermal-Cooling Assembly
FILE LOCATION: C:\Documents and Settings\sarah_cook\Desktop\Tsing
Ma\SM\A01\EN\Source\cpucool.fm
DELL CONFIDENTIAL – PRELIMINARY 9/4/09 - FOR PROOF ONLY
Replacing the Processor Thermal-Cooling
Assembly
CAUTION: Before you begin the following procedure, follow the safety
instructions that shipped with your computer.
This procedure assumes that you have completed the removal procedure
"Removing the Processor Thermal-Cooling Assembly" on page 43.
1
Align the six captive screws on the processor thermal-cooling assembly
with the screw holes on the system board and tighten the screws in
sequential order.
2 Replace the fan (see "Replacing the Fan" on page 42).
3 Replace the memory cover and tighten the screws.
1 processor thermal-cooling
assembly
2 captive screws (6)
2
1