96 System Board Assembly
FILE LOCATION: C:\Documents and Settings\sarah_cook\Desktop\Tsing
Ma\SM\A01\EN\Source\sysboard.fm
DELL CONFIDENTIAL – PRELIMINARY 9/4/09 - FOR PROOF ONLY
Replacing the System Board Assembly
CAUTION: Before you begin the following procedure, follow the safety
instructions that shipped with your computer.
NOTICE: Ensure that any loose cables do not get caught beneath the system
board.
This procedure assumes that you have completed the removal procedure
"Removing the System Board Assembly" on page 95.
1
Insert the left side of the system board into the base of the computer at an
angle until the connectors on the system board are aligned with the holes
on the base of the computer, then carefully lower the system board into
place.
2
Replace the three M2.5 x 5-mm screws on the system board.
1 system board 2 M2.5 x 5-mm system board screws (3)
3 USB daughter-card cable
connector
4 card with Bluetooth technology cable
connector
5 speaker cable connector
To Next Page
Loading...
