Power Button and Multimedia Button Pads 63
FILE LOCATION: C:\Documents and Settings\sarah_cook\Desktop\Tsing
Ma\SM\A01\EN\Source\pwrbutton.fm
DELL CONFIDENTIAL – PRELIMINARY 9/4/09 - FOR PROOF ONLY
1
Connect the power-button pad cable in the connector on the bottom of
the multimedia button pad.
2
Slide the power button pad to the right, positioning it under the tabs on
the palm rest and aligning the screw holes.
3
Slide the multimedia button pad to the right, aligning it under the tab on
the palm rest and aligning the screw holes.
4
Replace the M2 x 3-mm screw that secures the power button pad to the
palm rest.
5
Replace the M2 x 3-mm screw that secures the multimedia button pad to
the palm rest.
6
Connect the multimedia-button pad cable to the connector on the system
board.
7
Replace the keyboard (see "Replacing the Keyboard" on page 58).
8
Replace the hinge cover (see "Replacing the Hinge Cover" on page 54).
To Next Page
Loading...
