Dell Vostro 3460 - Installing the Display Assembly; Removing the Display-Hinge Cover

Installing the Display Assembly
1. Align the display assembly to its location on the computer base.
2. Tighten the screws to secure the display assembly to the chassis.
3. Install the:
a) palmrest
b) keyboard
c) battery
4. Follow the procedures in After Working Inside Your Computer .
Removing the Display-Hinge Cover
1. Follow the procedures in Before Working On Your Computer .
2. Remove the:
a) battery
b) base cover
c) memory
d) optical drive
e) hard drive
f) keyboard
g) palmrest
h) WLAN card
i) display assembly
3. Remove the screws that secure the display-hinge cover to the computer.
25