11. Install the back cover.
12. Install the stand.
13. Follow the procedure in After working inside your computer.
Power-button and I/O board
Removing the power-button and I/O board
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the stand.
3. Remove the back cover.
4. Remove the system-board shield.
5. Remove the I/O cover.
6. Remove the bottom cover.
7. Remove the I/O bracket.
About this task
The following image(s) indicate the location of the power-button and I/O board and provides a visual representation of the
removal procedure.
Removal and installation procedures for High Performance processors
97
To Next Page
Loading...
