Replacing the battery
WARNING: Before working inside your tablet, read the safety
information that shipped with your tablet and follow the steps in
Before working inside your tablet. After working inside your tablet,
follow the instructions in After working inside your tablet. For more
safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1 Align the screw holes on the battery with the screw holes on the back-
cover assembly.
2 Replace the screws that secure the battery to the back-cover assembly.
3 Connect the battery cable to the system board.
4 Align the back-cover assembly with the display assembly and snap it into
place.
5 Replace the screws that secure the back-cover assembly to the display
assembly.
6 Turn the tablet over.
14
To Next Page
Loading...
