Replacing the coin-cell battery
WARNING: Before working inside your tablet, read the safety
information that shipped with your tablet and follow the steps in
Before working inside your tablet. After working inside your tablet,
follow the instructions in After working inside your tablet. For more
safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1 Adhere the coin-cell battery to the back-cover assembly.
2 Connect the coin-cell battery cable to the system board.
3 Slide the power-button board cable into its connector on the power-
button board and press down the latch to secure the cable.
Post-requisites
Replace the battery.
29
To Next Page
Loading...
