Dell XPS 12 - Removing the Camera Module; Camera Module Removal Procedure

Removing the display
assembly
WARNING: Before working inside your tablet, read the safety
information that shipped with your tablet and follow the steps in
Before working inside your tablet. After working inside your tablet,
follow the instructions in After working inside your tablet. For more
safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
Remove the battery.
Procedure
1 Peel off the display cable from the system board.
2 Using the pull tab, disconnect the display cable from the system board.
3 Peel off the display cable from the back-cover assembly.
50