Dell XPS 12 - Replacing the Camera Module; Camera Module Replacement Procedure

Replacing the display assembly
WARNING: Before working inside your tablet, read the safety
information that shipped with your tablet and follow the steps in
Before working inside your tablet. After working inside your tablet,
follow the instructions in After working inside your tablet. For more
safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1 Adhere the display cable to the back-cover assembly.
2 Connect the display cable to the system board.
3 Adhere the display cable to the connector on the system board.
Post-requisites
Replace the battery.
52