Replacing the solid-state drive
WARNING: Before working inside your tablet, read the safety
information that shipped with your tablet and follow the steps in
Before working inside your tablet. After working inside your tablet,
follow the instructions in After working inside your tablet. For more
safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
CAUTION: Solid-state drives are fragile. Exercise care when handling
the hard drive.
Procedure
1 Slide the solid-state drive into the slot on the system board.
2 Align the screw hole on the solid-state drive with the screw hole on the
back-cover assembly.
3 Replace the screw that secures the solid-state drive to the back-cover
assembly.
Post-requisites
Replace the battery.
17
To Next Page
Loading...
