Replacing the headset port
WARNING: Before working inside your tablet, read the safety
information that shipped with your tablet and follow the steps in
Before working inside your tablet. After working inside your tablet,
follow the instructions in After working inside your tablet. For more
safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1 Slide the headset-port cable into its connector on the system board and
press down the latch to secure the cable.
2 Align the screw holes on the headset-port bracket and the headset port
with the screw holes on the back-cover assembly.
3 Replace the screws that secure the headset-port bracket and the headset
port to the back-cover assembly.
Post-requisites
Replace the battery.
32
To Next Page
Loading...
