Removing the coin-cell
battery
WARNING: Before working inside your tablet, read the safety
information that shipped with your tablet and follow the steps in
Before working inside your tablet. After working inside your tablet,
follow the instructions in After working inside your tablet. For more
safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
CAUTION: Removing the coin-cell battery resets the BIOS setup
program’s settings to default. It is recommended that you note the
BIOS setup program’s settings before removing the coin-cell battery.
Prerequisites
Remove the battery.
Procedure
1 Lift the latch and disconnect the power-button board cable from the
power-button board.
2 Disconnect the coin-cell battery cable from the system board.
27
To Next Page
Loading...
