2 Lift the latches and disconnect the headset-port cable, power-button
board cable and display cable from the system board.
1 vibration-motor cable 2 headset-port cable
3 speaker cable 4 latch
5 volume-buttons board
cable
6 microphone cable
7 camera cables (2) 8 coin-cell battery cable
9 power-button board cable 10 speaker cable
11 display cable 12 dock-connector cable
3 Lift the antenna cable off the system board.
4 Remove the screws that secure the I/O bracket to the system board.
43
To Next Page
Loading...
