Removing the speakers
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the base cover.
2 Remove the battery.
Procedure
1 Disconnect the speaker cable from the system board.
2 Remove the four screws (M2x2) that secure the speakers to the palm-rest
assembly.
3 Note the speaker-cable routing and peel o the tape that secures the speaker
cable to the system board.
31
To Next Page
Loading...
