Removing the display assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the base cover.
2 Remove the battery.
Procedure
1 Disconnect the touchscreen cable (optional) and camera cable from the system
board.
2 Peel o the tape that secures the antenna cables to the system board.
3 Remove the screw (M2x3) that secures the wireless-card bracket to the system
board.
4 Lift the wireless-card bracket o the wireless card.
54
To Next Page
Loading...
