100 Removing and Installing Parts
www.dell.com | support.dell.com
Floppy Drive
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions page 13.
Removing a Floppy Drive
1 Follow the instructions in "Before You Begin" on page 80.
2 Open the computer cover (see page 82).
3 Disconnect the power and floppy-drive cables from the back of the floppy drive.
4 Press inward on the two tabs on the sides of the drive, slide the drive upward, and
remove it from the floppy-drive bay.
floppy-drive cable
power cable
tabs (2)
floppy drive
G0550bk1.book Page 100 Thursday, July 10, 2003 1:55 PM
To Next Page
Loading...
