Removing and Installing Parts 97
4 Press in on the tabs on each side of the drive and slide the drive up and out.
Installing a Hard Drive
1 Unpack the replacement hard drive, and prepare it for installation.
2 Check the documentation for the drive to verify that it is configured for your
computer.
3 Follow the instructions in "Before You Begin" on page 80.
4 Open the computer cover (see page 82).
tabs (2)
IDE hard-
drive cable
power cable
IDE hard
drive
IDE hard drive example serial ATA hard drive example
serial ATA
hard drive
serial ATA hard-
drive cable
power cable
tabs (2)
system board
connector
system board
connector
G0550bk1.book Page 97 Thursday, July 10, 2003 1:55 PM
To Next Page
Loading...
