Dell XY689 - Page 65

SATA Operation Change the SATA controller mode
to either ATA or AHCI.
Default: AHCI
Adapter Warnings Enable or disable the Adapter
Warnings.
Default: Enable
Function Key Behavior Specifies the behavior of the
function key <Fn>.
Default: Function key
Intel Smart Connect
Technology
Enable or disable Intel Smart
Connect Technology.
Default: Enable
Intel Rapid Start Technology Enable or disable Inter Rapid Start
Technology.
Deafult: Enable
Miscellaneous Devices These fields let you enable or
disable various on-board devices.
Battery Health Displays a message about the
battery health.
Table 7. Security
Set Asset Tag This field displays your system's asset tag. If the asset tag is not already
set, this field can be used to enter it.
Set Admin Password Allows you to change or delete the administrator password.
Set System Password Allows you to change or delete the system password.
Set HDD Password Allows you to set a password on the computer's internal hard drive
(HDD).
Password Change Allows you to change the security password.
Password Bypass Allows you to bypass the system password and the internal HDD
password prompts during a system restart/resume from hibernate
state.
Table 8. Boot
Boot Priority Order Specifies the order of different devices in which the
computer will boot through at start up.
Windows Boot Manager Allows windows to search for a hard drive with
windows files and boot from it.
Secure Boot Species if the UEFI secure boot option is enabled
or disabled.
Add Boot Option Allows the user to add an additional boot device.
Delete Boot Option Allows the user to remove an existing boot device
from the boot order.
Exit
This section allows you to save, discard, and load default settings before exiting from System Setup.
65