DELTA DORE Tybox 1137 - Installing the Receiver; Location; Mounting;Connection; Time and Date Setting

4
1
31
1
12
0
23
0
59
2021...
1
2
3
4
5
8
9
10
11
12
6
7
EXIT
❶ Turn the dial to .
❷-> ❻ Set the day, month, year with + or -.
❼ Conrm with OK.
❽-> ❿ Set the hour then the minutes with + or -.
⓫ Conrm with OK.
⓬ To exit the mode, turn the dial.
3. Time and date setting
2. Installing the receiver
2.1 Location
The receiver must be installed a minimum of 20
cm away from any metal surface (e.g. the boiler),
and about 1.50 m from the ground to ensure an
optimum radio link with the transmier.
2.2 Mounting/Connection
❶ First of all, switch o the power to your
installation.
❷ The receiver can be xed using suitable
screws or by (supplied) adhesives.
❸ Comply with the cable colours when wiring.
Blue: Neutral
Brown: Live
Black and grey: Controls for the thermostat
input or the generator circulator (boiler or heat
pump).
❹ Once the receiver is connected, turn on the
power to your installation.
Th
NL
NL
~1,50 m
> 20 cm
OFF
ON
OR
If the screen displays “OFF”, your product is connected to the Tydom app (menu 1-10 = 1).
The date and time details are no longer show on the thermostat screen.
WARNING: the heating is set to Frost Protection when in this position.
REMINDER:
The Tybox consists of an X3D radio
transmier and receiver that come pre-
associated.