Delta-q IC SERIES Installation & Troubleshooting Guide

IC650 DC Wiring Instructions
39
7. Attach the positive and negative leads to
the positive and negative terminals using
the Torx T30 screwdriver and Torx T30/
M6 screws, with a recommended torque
of 4.5Nm +/-5%.
8. Replace the DC terminal block cover and
use the third, shorter T10 screw (supplied)
to secure the cover with a recommended
torque of 0.6Nm +/-6%.

Delta-q IC SERIES Specifications

General

Brand	Delta-q
Model	IC SERIES
Category	Battery Charger
Language	English