EasyManua.ls Logo

Delta 13" PORTABLE PLANER 22-590 User Manual

Delta 13" PORTABLE PLANER 22-590
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
22-590
13" PORTABLE PLANER
Raboteuse de 330 mm (13 po)
Cepilladora de 330 mm (13")
Instruction manual
Manuel d’utilisation
Manual de instrucciones
www.deltaportercable.com
Français (17)
Español (33)
INSTRUCTIVO DE OPERACIÓN, CENTROS
DE SERVICIO Y PÓLIZA DE GARANTÍA.
LÉASE ESTE INSTRUCTIVO
ANTES DE USAR EL PRODUCTO.
Question and Answer IconNeed help?

Do you have a question about the Delta 13" PORTABLE PLANER 22-590 and is the answer not in the manual?

Delta 13" PORTABLE PLANER 22-590 Specifications

General IconGeneral
Power/Motor15 Amp
Planing Width/Maximum Cutting Width/Max. Planing Width13 inches
Planing Depth/Maximum Cutting Depth/Max. Planing Depth1/8 inch
Feed Rate26 feet per minute
Cutterhead Speed10, 000 RPM
Maximum Material Thickness6 inches
Number of Knives/Blades2
Dust Port2-1/2 inches

Summary

Important Safety Instructions

Safety Guidelines - Definitions

General Safety Rules

Additional Specific Safety Rules

Functional Description

Foreword

Introduction to the DELTA Model 22-590 portable planer.

Carton Contents

Unpacking and Cleaning

Assembly

How to Prepare for Dust Management

Options for dust management using deflector or collection attachment.

How to Install the Dust Collection Attachment

Step-by-step guide to install the dust collection attachment.

Operation

How to Start and Stop the Planer

Instructions for turning the planer on and off and securing the switch.

How to Use the Cutterhead Lock

Explanation of the cutterhead lock's function to eliminate snipe.

How to Adjust the Head Assembly

Adjusting the head assembly for depth of cut using handles.

How to Use the Material Removal Gauge

Recommended Depth of Cut

Guidelines for maximum depth of cut based on wood type and width.

How to Use the Depth Stop

Setting the depth stop for repetitive planing operations.

How to Use the Adjustable Indexing Ring

Proper Planing Techniques

Minimum/Maximum Width/Height/Depth

Snipe

To Avoid Snipe

Methods to prevent snipe during planing operations.

Twisted, Cupped and Bowed Wood

To Plane Twisted Wood

Recommendations for planing twisted wood to avoid jams.

To Plane Cupped Wood

Techniques for planing cupped wood for best results.

To Plane Bowed Wood

Using a jointer for proper removal of bow in wood.

Troubleshooting

Maintenance

How to Check, Adjust, Clean and Replace Knives

Detailed steps for knife maintenance, cleaning, and replacement.

How to Adjust the Infeed and Outfeed Tables

How to Calibrate the Depth Adjustment Scale

Base Maintenance

Circuit Breaker Reset Button

Brush Change

Replacing the Drive Belt

Keep Machine Clean

Lubrication

Replacement Parts

Service

Free Warning Label Replacement

Service and Repairs

Accessories

Warranty

Related product manuals