To Next PageTo Next Page
Need help?Do you have a question about the Delta 22-560 and is the answer not in the manual?
General| Type | Benchtop Planer |
|---|---|
| Cutterhead Speed | 10, 000 RPM |
| Number of Knives | 2 |
| Motor | 15 Amp |
| Voltage | 120V |
| Maximum Cutting Depth | 1/8 inch |
| Feed Rate | 26 feet per minute |
Instructions for unpacking the machine and removing protective coatings.
Steps for assembling the stand for the planer model.
Instructions for positioning the infeed and outfeed table extensions.
Steps to attach the cutterhead lock handle to the shaft.
Guidelines for electrical circuits and extension cords for the tool.
Details on the tool's voltage and frequency requirements.
Essential safety instructions for grounding the tool to prevent electric shock.
How to operate the on/off switch for the planer.
Method to secure the switch to prevent unauthorized use.
Instructions on how to adjust the head assembly for depth of cut.
Location for storing the knife transfer tool.
Method for storing the planer power cord.
Location for storing the included wrench.
How to inspect and replace motor brushes for optimal performance.
Recommended lubrication points and procedures for gears and bushings.
Information on available accessories and recommended usage.
Contact information for obtaining parts, service, and warranty support.
