To Next PageTo Next Page
Need help?Do you have a question about the Delta ShopMaster TP300 and is the answer not in the manual?
General| Power | 15 Amp |
|---|---|
| Type | Benchtop Planer |
| Weight | 71 lbs |
| Maximum Cutting Width | 12-1/2 in. |
| Maximum Cutting Depth | 1/8 in. |
| Cutterhead Speed | 9, 000 RPM |
| Number of Blades | 2 |
| Feed Rate | 26 feet per minute |
| Motor | 15 Amp, 120V |
| Dust Port Size | 2-1/2 inches |
Key safety guidelines and precautions to follow before operating the equipment to prevent accidents and injury.
Details about the machine's motor voltage (120 volt) and frequency (60 HZ) alternating current.
Instructions for attaching the raising and lowering handle to the shaft using a screw.
How to turn the planer on and off using the ON/OFF switch toggle.
