Delta 18657 - Troubleshooting

15 - English
WRENCH STORAGE
You can store your supplied wrench (A) Fig. 25 in the wrench storage hole (B), located on the left rear side of the
machine.
CARRYING HANDLES
Carrying handles (B) Fig. 26 are provided on both sides of the planer at the base and the top.
Fig. 25
A
B
Fig. 26
B
B
STOCK TRANSFER BAR
You can use the stock transfer bar (A) Fig. 27 for
Fig. 27
A
transferring stock (especially long workpieces) from the
outfeed end to the infeed end of the machine for
additional cuts.
TROUBLESHOOTING
For assistance with your machine, visit our website at www.deltamachinery.com for a list of service centers or call the
DELTA Machinery help line at 1-800-223-7278 (In Canada call 1-800-463-3582).