Need help?Do you have a question about the Delta 34-976 and is the answer not in the manual?
General| Motor Power | 1.5 HP |
|---|---|
| Voltage | 120V |
| Blade Diameter | 10 inches |
| Arbor Size | 5/8 inch |
| Motor | 120V |
| Max. Depth of Cut at 90 Degrees | 3-1/8 inches |
| Max. Depth of Cut at 45 Degrees | 2-1/4 inches |
| No Load Speed | 5000 RPM |
Steps for removing protective coating and cleaning unpainted surfaces of the band saw.
Essential safety rules to prevent personal injury when operating machinery.
Additional safety guidelines tailored for band saw operation and maintenance.
List of basic hand tools needed for assembling the band saw.
Instructions for building the band saw stand structure.
How to attach the band saw to the assembled stand.
Steps for mounting the motor and connecting the power switch.
Guide for attaching belt guards, pulleys, and the drive belt.
Electrical requirements, wire gauge, and extension cord usage for safe power.
Critical procedures for proper grounding to ensure operator safety.
Correct method for inserting and seating the table insert.
How to adjust the table angle for different cutting operations.
Procedure to ensure the table is set precisely at 90 degrees.
Setting correct blade tension based on size and work.
Aligning the blade to run true in the center of the wheel tires.
Positioning the upper blade guides and support bearing correctly.
Adjusting the lower blade guides and support bearing.
Safe steps for replacing the band saw blade.
Guidance on choosing appropriate blades for various cutting tasks.
Key operating practices for safe and efficient use of the band saw.
Methods for safely cutting curved shapes with the band saw.
Information on how to get parts, service, and warranty assistance.
Directory of service locations for Delta machinery.
To Next Page
