EasyManua.ls Logo

Delta 34-670 User Manual

Delta 34-670
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Question and Answer IconNeed help?

Do you have a question about the Delta 34-670 and is the answer not in the manual?

Delta 34-670 Specifications

General IconGeneral
TypeMiter Saw
Blade Diameter10 inches
Voltage120 V
Arbor Size5/8 in
No-Load Speed5000 RPM
Dust Port Size1-1/4 in
Bevel Capacity45° Left

Summary

Safety Rules

General Safety Precautions

Essential safety guidelines for operating woodworking machinery safely and preventing injury.

Additional Safety Rules for Circular Saws

Circular Saw Specific Safety

Specific safety rules for circular saws, covering blade use, kickback, and operation.

Unpacking and Cleaning

Assembling Stand

Assembling Saw to Stand

Assembling Blade Tilting Handwheel

Recommended Motor for Your Saw

Assembling Motor to Motor Mounting Plate

Assembling Motor and Motor Mounting Plate to Saw

Assembling Motor Pulley, Belt and Pulley Guard, and Drive Belt

Connecting Motor Cord to Switch Assembly

Assembling Blade Guard and Splitter Assembly

Assembling Extension Wings

Assembling Guide Rails and Switch Assembly

Assembling Rip Fence to Guide Rails

Connecting Saw to Power Source

Power Connections

Electrical connection requirements, circuit protection, and voltage matching for the saw.

Extension Cords

Guidelines for selecting appropriate gauge extension cords based on length and voltage.

Grounding Instructions

120 Volt, Single Phase Operation

Specific grounding and connection instructions for 120V single-phase power.

240 Volt, Single Phase Operation

Fastening Stand to Supporting Surface

Operating Controls and Adjustments

Starting and Stopping Saw

How to turn the saw on and off using the switch trigger.

Locking Switch in the 'OFF' Position

Securing the switch in the 'OFF' position using a padlock for safety.

Overload Protection

Raising and Lowering the Blade

Tilting the Blade

Adjusting 90 Degree and 45 Degree Positive Stops

Backlash Adjustments for Blade Raising and Blade Tilting Mechanisms

Rip Fence Operation and Adjustments

Miter Gage Operation and Adjustment

Adjusting Table Insert

Changing the Saw Blade

Repositioning Motor for Storage

Operation

Cross-Cutting

Clamp Attachment for Miter Gage

Ripping

Using Accessory Moulding Cutterhead

Using Accessory Dado Head

Using Auxiliary Wood Facing on Rip Fence

Constructing Push Stick

Two Year Limited Warranty

Porter-Cable • Delta Service Centers

Related product manuals