Delta 36-978 - Constructing a Push Stick

32
When ripping work less than 6" wide, use a push stick to complete the feed, You can make one from
scrap material by using this pattern.
PUSH STICK
MAKE FROM 1/2
"
OR 3/4
"
WOOD OR THICKNESS
LESS THAN WIDTH OF
MATERIAL TO BE CUT
CUT OFF HERE TO
PUSH 1/4
"
WOOD
CUT OFF HERE TO
PUSH 1/2
"
WOOD
NOTCH TO HELP
PREVENT HAND
FROM SLIPPING
1/2
"
SQUARES
CONSTRUCTING A PUSH STICK