8
Delta Models 36-978 and 36-979 are left-tilting 10" contractor saws with a built-in mobility kit. The saws have a powerful
1-1/2 HP induction motor which can handle tough cutting operations. The 36-978 comes with sheet metal wings and
the 36-979 comes with cast iron wings.
A rip fence assembly is not packaged with the product. You must install and use a rip fence system
for ripping operations.
TABLE SAW PARTS
FOREWORD
FUNCTIONAL DESCRIPTION
CARTON CONTENTS
NOTICE: The photo on the manual cover illustrates the current production model. All other illustrations contained in
the manual are representative only and may not depict the actual labeling or accessories included. These are intended
to illustrate technique only.
1. Table Saw
2. Handwheel (2)
3. Miter Gauge
4. 7/8" Open End Wrench
5. 7/8" and 1/2" Close End Wrench
6. Drive Belt
7. Saw Blade
8. 4mm Hex Wrench
9. Wrench Hook
10. Lock Knob (2)
11. Blade Guard and Splitter Assembly
12. Motor
13. Table Insert
14. Belt Guard
15. Motor Plate
16. Dust Collector Adaptor
17. Splitter Bracket
18. Pulley Guard Plate
19. Back Brace
2
3
4
5
6
7
8
9
10
12
13
14
11
15
16
17
1918
1
To Next Page
Loading...
Need help?
General
