Delta 96-107 - Hardware Contents; Assembly; Install the Water Tray; Attach the Saw Arm Assembly

9
FEATURESASSEMBLY
Attach the Saw Arm Assembly
Insert the Water Tray
Figure 5
Figure 6
Figure 7
1. Attach the Saw Arm Assembly to the main frame by
rstaligningthePegs(C)ontheSawArmAssemblyto
the holes on the main frame as shown in Figure 6.
2. Fasten the Saw Arm Assembly by using the
three M10 X 60 Hex Head Screws (H1) and the
8mm Allen Wrench (H2) as shown in Figure 7.
Ensure the saw is on a level
and stable surface.
Insert Water Tray (1) by sliding it into the
Main Frame (2) as shown in Figure 5.
C
1
C
H1