2Amplon RT Gen3 Series
z
Please only use the VDE-tested and CE-marked power cables to connect
the loads to the UPS.
z
When installing the equipment, please ensure that the sum of the leakage
current of the UPS and the connected devices does not exceed 3.5 mA.
z
Only qualified service personnel can upgrade the UPS’s firmware.
z
Before applying electrical power to the UPS, you must allow the UPS to ad-
ensure that there is no moisture condensing inside the unit.
z
Do not dismantle the UPS.
z
Do not disconnect the mains to the UPS or the building wiring outlet
(shockproof socket outlet) during operation since this would disable the
protective earthing of the UPS and of all connected loads.
z
The UPS features its own and some models have internal current source
(batteries). The UPS’s output sockets or output terminal blocks may be
electrically live even if the UPS is not connected to the building wiring out-
let.
z
Please replace fuse(s) only with the same type and amperage in order to
avoid fire hazards.
z
In order to completely disconnect the UPS from the mains, please first
press the button.
z
Do not pour and splash any liquid on the UPS. Do not insert any object into
the UPS’s slits and openings. Do not put beverages on or around the UPS.
z
The UPS operates with hazardous voltage. Repairs must be only carried
out by qualified service personnel.
Risk of electric shock! Even after the unit is disconnected from the
mains (building wiring outlet), components inside the UPS are still
connected to the batteries and electrically live and dangerous.
z
Before carrying out any kind of service and/ or maintenance, disconnect
the batteries from the UPS and verify that no current is present and no
hazardous voltage exists in the terminals of high capability capacitor such
as BUS capacitors.
To Next Page
Loading...
Need help?
General