19
1
The UPS (standard runtime model only) is shipped out from the factory
without connecting the battery cable for safety consideration. Before
installing the UPS, please follow the steps below to connect the battery
cable first.
Step 1 Step 2 Step 3
Remove
the Battery Cover.
Connect
the Battery Cable.
Reinstall
the Battery Cover.
2
Plug the UPS into a two-pole, three-wire and grounded receptacle only.
Avoid using extension cords and only use the input cable provided in the
package.
3
Connect devices to the UPS’s outlet receptacles.
4
USB Port RS-232 Port Mini Slot
To Next Page
Loading...
Need help?
General