How to fix The absolute coordinate has not been initialized in Delta ASD-A2-4543?
If your Delta Servo Drives are showing that the absolute coordinate has not been initialized because the motor is used for the first time or the battery had run dry but has replaced a new one, initialize the absolute coordinate.
How to resolve Encoder does not complete the command which is issued by servo drive in Delta ASD-A2-4543 Servo Drives?
If your Delta Servo Drives are showing that the encoder does not complete the command which is issued by servo drive because servo drive has not completely written barcode into encoder or the encoder does not complete the command issued by servo drive, correct the wiring.
How to fix regeneration error in Delta ASD-A2-4543?
If your Delta Servo Drives are showing a regeneration error because you choose the wrong regenerative resistor or does not connect to external regenerative resistor, calculate the value of the regenerative resistor again and correctly set the value of P1-52 and P1-53.
What to do if The servo drive does not connect to external regenerative resistor in Delta ASD-A2-4543 Servo Drives?
If your Delta Servo Drives are showing that the servo drive does not connect to external regenerative resistor because the input of regenerative resistor capacity is over 0 and the servo drive does not connect to external regenerative resistor, if wish to apply regenerative brake, please connect to external regenerative resistor.
How to resolve CANopen SDO receives buffer overflow in Delta Servo Drives?
To resolve CANopen SDO receives buffer overflow in Delta Servo Drives (receives more than two SDOs within 1 ms), use NMT: Reset node or 0x6040.Fault Reset.
How to resolve CANopen PDO receives buffer overflow in Delta ASD-A2-4543?
To resolve CANopen PDO receives buffer overflow in Delta Servo Drives (receives more than two same PDOs of COBID within 1 millisecond), use NMT: Reset node or 0x6040.Fault Reset.
How to fix Index error occurs when accessing CANopen PDO in Delta ASD-A2-4543 Servo Drives?
To fix index error occurs when accessing CANopen PDO in Delta Servo Drives, when the specified Index in the message does not exist, use NMT: Reset node or 0x6040.Fault Reset.
How to fix Sub-Index error occurs when accessing CANopen PDO in Delta Servo Drives?
To fix sub-index error occurs when accessing CANopen PDO in Delta Servo Drives, when the specified Sub-Index in the message does not exist, use NMT: Reset node or 0x6040.Fault Reset.
How to fix Data Size error occurs when accessing CANopen PDO in Delta ASD-A2-4543?
To fix data size error occurs when accessing CANopen PDO in Delta Servo Drives, when the data length in the message does not match to the specified object, use NMT: Reset node or 0x6040.Fault Reset.
How to fix Data range error occurs when accessing CANopen PDO in Delta ASD-A2-4543?
To fix data range error occurs when accessing CANopen PDO in Delta Servo Drives, when the data value in the message is over the range of the specified object, use NMT: Reset node or 0x6040.Fault Reset.
General| Brand | Delta |
|---|---|
| Model | ASD-A2-4543 Series |
| Category | Servo Drives |
| Language | English |
To Next Page
