Delta ASD-M-0721 Series - Page 372

ASDA-M Chapter 8 Parameters
Revision December, 2014 8-141
Settings：
When the voltage of DC BUS is lower than P4-24*
2
, the
undervoltage alarm occurs.
P4-25 SFSW Special Function Switch
Address: 0432H
0433H
Parameter
Attribute：
Parameter for individual axis
Related Section: -
Operational
Interface：
Panel / Software Communication
Default：
0x00000000
Control
Mode：
ALL
Unit：
-
Range：
0x00000000 ~ 0x00000001
Data Size：
32bit
Format：
HEX
Settings：
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Software limit switch in
speed mode
Sofware limit switch in speed mode
0: In speed mode, disable software limit protection and show
alarms only
1: In speed mode, enable software limit protection and show
alarms