II
3 If you use heat treatment to deworm, leave the packaging materials in an
environment of over 56°C for a minimum of thirty minutes.
Connect the drive to a three-phase three-wire or three-phase four-wire Wye
system to comply with UL standards.
If the drive generates leakage current over AC 3.5 mA or DC 10 mA on a grounding
conductor, compliance with local grounding regulations or IEC61800-5-1 standard
is the minimum requirement for grounding.
NOTE
In the pictures in this manual, the cover or safety shield is disassembled only when explaining the details
of the product. During operation, install the top cover and wiring correctly according to the provisions.
Refer to the operation descriptions in the manual to ensure safety.
The figures in this instruction are only for reference and may be slightly different depending on your model,
but it will not affect your customer rights.
The content of this manual may be revised without prior notice. Consult our distributors or download the
latest version at http://www.deltaww.com/iadownload_acmotordrive
To Next Page
Loading...
Need help?
General