Need help?Do you have a question about the Delta MS300 and is the answer not in the manual?
General| Series | MS300 |
|---|---|
| Cooling | Fan cooling |
| IP Rating | IP20 |
| Input Voltage | 3-phase 380 ~ 480VAC |
| Output Current | Varies by model |
| Overload Capacity | 150% of rated current for 60 seconds |
| Braking Unit | Built-in or optional |
| Control Method | V/F control, Sensorless Vector Control |
| Speed Control Range | 1:100 (SVC) |
| Protection Functions | Overcurrent, Overvoltage, Undervoltage, Overheating, Short Circuit |
| Communication Interface | RS-485 |
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -20°C to +60°C |
| Humidity | 90% RH, non-condensing |
| Dimensions | Varies by model |
| Weight | Varies by model |
Defines PROFINET IO as a fieldbus protocol for industrial networks and its communication channels.
Highlights the CMM-PN02's ability to connect drives to PROFINET for easy data exchange.
Details Ethernet and environmental specifications for the communication card.
Provides the physical dimensions of the communication card with diagrams.
Identifies and explains the various components and connectors on the card.
Explains the meaning of different LED indicators on the communication card.
Details the pinout and definition for the RJ45 connector.
Explains the definition and purpose of MAC addresses for the communication card.
Illustrates the mounting positions for the communication card in different frames.
Describes the types of communication cables and connection methods for different frames.
Provides step-by-step instructions for installing the communication card in MS300.
Provides step-by-step instructions for installing the communication card in MH300.
Illustrates the wiring diagram for connecting the CMM-PN02 to the network.
Details key parameters for setting up the communication card on the drive.
Provides identification and maintenance information for the PROFINET card.
Explains how to access real-time data using control and status words.
Describes how the drive handles disconnection from the Profinet card.
Covers PC and PLC IP address configuration for network communication.
Demonstrates speed mode configuration using Siemens STEP 7.
Demonstrates speed mode configuration using Siemens TIA PORTAL.
Shows how to read/write drive parameters synchronously and asynchronously.
To Next Page
