To Next PageTo Next Page
Need help?Do you have a question about the Delta ME300 Series and is the answer not in the manual?
General| Power Rating | 0.4 kW ~ 110 kW |
|---|---|
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit |
| Communication | RS-485 |
| Storage Temperature | -20-60°C |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Input Voltage | 3-phase 220VAC |
| Humidity | 90% RH, non-condensing |
Details drive's nameplate specifications and identification.
Details required clearances for proper mounting and ventilation.
Provides information on cooling requirements and power dissipation.
Illustrates the overall system wiring and component connections.
Covers essential precautions and guidelines for safe and correct wiring.
Shows the main electrical circuit diagram of the drive.
Details specifications for main circuit terminals, including ring lug dimensions.
Explains the functions and wiring of analog and contact input/output terminals.
Provides general technical specifications, control methods, and protection features.
Details environmental operating conditions and transportation guidelines.
Explains derating curves for ambient temperature, altitude, and carrier frequency.
Explains the meaning of various displayed items and their corresponding functions.
Provides step-by-step guides for operating the keypad and navigating menus.
Lists fundamental motor and drive parameters like frequency, voltage, and acceleration/deceleration times.
Details configuration for digital inputs and outputs, including multi-function terminals.
Explains settings for analog inputs and outputs, including bias, gain, and filter times.
Details parameters for induction and permanent magnet motors, including auto-tuning.
Outlines protection parameters like over-voltage, over-current, and over-torque.
Details parameters for advanced PID control, including gains, limits, and modes.
Explains the fundamental principles and standards of the STO function.
