Delta ME300 Series User Manual

Chapter 7 Optional AccessoriesME300
7-50
7-12 Mounting Adapter Plate
T
his mounting adapter accessory is to change the wiring method for the ME300 / MS300 / MH30
0
s
eries to provide flexible installation. It changes the wiring from the main input/motor output at the bottom
to the main input from the top and the motor output from the bottom. However, when you use the mounting
adapter plate to change the drive from the VFD-E/VFD-EL series to the ME300/MS300/MH300 series, you
can still use the original wiring method. The following table shows the correspondences.
T
able 7-44
Series
Models
ME300 /
MS300 /
MH300
VFD-E VFD-EL
MKM-MAPB Frame A–B Frame A Frame A
MKM-MAPC Frame C Frame B Frame B

Delta ME300 Series Specifications

General

Power Rating	0.4 kW ~ 110 kW
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit
Communication	RS-485
Storage Temperature	-20-60°C
Dimensions	Varies by model
Weight	Varies by model
Input Voltage	3-phase 220VAC
Humidity	90% RH, non-condensing