Delta DVP-ES3 Series User Manual

Chapter 6 Writing a Program
6-33
6_
 Method 1
On the PLC menu, click New Devices Table, or on the toolbar.
 Method 2
Right-click Device Monitoring Table in the project management area, and click New.
Type a table name in the Add Monitor Table dialog box, and then click OK. An item appears under Device
Monitor Table in the project management area. Double-click the item to open the monitoring table. You can
create several monitoring tables in the project, and the monitoring tables are saved with the project.

Delta DVP-ES3 Series Specifications

General

Brand	Delta
Model	DVP-ES3 Series
Category	Controller
Language	English